TRANSMISOR Y RECEPTOR
Advantages of our wireless dmx product:
1. Compact in size : Dimension only: 13.5cm x 2cm x 2cm
2. It can operate either as transmitter or receiver and they are convenient in operating.
Below are the pictures for your reference. It is an example for the use of the listed item. Since it is XLR type, you can just simplely plug one to the DMX controller, it will act as transmitter. Then you plug another one into the DMX socket of the lighting fixture to act as receiver. Just make sure the receiver has the same ID as that the transmitter. That is it!
3. Using global free license 2.4GHz frequency band, 126 automatically jumping frequencies to ensure smooth communications among transmitters and receivers.
4. Capable of setting up different configurations to meet different needs, like point to point, point to multiple or multiple to multiple. The unit supports up to 7 universes of DMX (512x7=3584 receivers).
Model : Wireless DMX512 Transmitter & Receiver
Tricolor LED displaying
126 channels automatically jumping frequency, high anti-jamming ability to ensure working reliability.
7 groups ID code settable, user can use 7 groups individual wireless system without any interference with each other in the same place.
Input voltage: 5VDC 500mA MIN
Communication distanc: 700M(Open)
Work frequency section: 2.4GHz ISM band, 126 channels frequency section.
Max transmitting power rate: 20dBm
Receiver sensitive: -94dBm
Signal port: 3PIN male plug (for transmitter) & female plug (for receiver)
ID code and LED color corresponding correlation:
3: RED+GREED = YELLOW
5: RED+BLUE = PURPLE
6: GREEN+BLUE = CYAN
7: RED+GREED+BLUE = WHITE
Press key 1 time to indicate ID setting, press again to set ID, then ID value adding 1 each time by press.
LED constant lit up: no DMX or wireless signal
Red LED flash: transmitting
Green LED flash: Receiving
RF frequency------2. 400-2. 525G, total 126 channels, it is searching automatically.
ID Code------1-7 groups ID code, press "Key" for setting, it only can works under same ID code of transmitter and receiver.
1. Power on DMX512 wireless received board and transmitted board.
2. Press "Key" button to set same ID value of transmitted board and received board, please use different ID value if you need to use more than 1 group wireless system at the same time in the same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash more fast once DMX data more fast.
4. Communication was established correctly then.
Stage lighting, Disco hall, Large literature performance, Gymnasium lighting, Temporary stage performance, City lighting system, TV station, Conference center, Professional showplace, Theme parks, Bar lighting and so on.
1 x Wireless DMX Transmitter ( Male Plug)
3 x Wireless DMX Receiver (Female Plug)
4 x Power Adapter